MetalPlus™ Multi-Material Diamond Blade | GUSHI
GUSHI's MetalPlus™ is a multi-material diamond blade built to cut wood, metal and common building materials with one disc. The 115 mm version runs up to 13,300 rpm. It is a job-site blade for mixed-material work — not a replacement for a dedicated steel or tile blade on heavy runs.

What it cuts
Wood: softwood, plywood, laminate, MDF.
Metal: thin steel sheet, aluminium, and light sections — the kind you meet on site, not thick rebar or cast iron.
Building materials: plastic pipe, fibre cement, drywall, and similar.
What it does not cut
Thick rebar, hardened steel or continuous steel cutting — that is the job of a dedicated metal blade; pushing MetalPlus there wears it fast.
Tile, stone and concrete — use a tile or concrete diamond blade; MetalPlus is not made for them.
It does not polish. It cuts; a clean edge is as far as it goes.
Speed and build
The 115 mm blade is rated up to 13,300 rpm. Check your grinder's no-load speed before mounting.
WoodPlus™ technology is the diamond layering GUSHI uses on this disc; it is what lets the same edge handle both wood and metal instead of loading up.
Mount with the arrow in the rotation direction, flanges clean and tight.
How long it lasts — and why we don't quote a number
A diamond blade's life depends on what you cut, how hard you feed, and the rpm. On wood it runs long; on metal it wears faster. We don't print a "50× longer" claim because no single multiplier holds across those jobs, and a number we can't stand behind hurts more than it helps. Use it on mixed materials and it will outlast a basic blade on the same work.
Dust and safety
Cutting wood, MDF and fibre cement throws dust — wear a respirator rated for it and cut where you can vent.
Keep the blade guarded. A disc that minimises kickback still needs a steady hand and a firm grip.
Frequently asked
Is MetalPlus a wood or a metal blade?
Both. It is a multi-material disc for mixed job-site work; for long steel or tile runs, use the dedicated blade.
Will it cut rebar?
Thin sections, yes, in short bursts. Thick rebar or continuous steel cutting belongs to a dedicated metal blade.
What grinder do I need?
A standard 115 mm angle grinder whose no-load speed is at or below 13,300 rpm.
Does the life claim mean it never wears?
No. Life depends on material and feed; on metal it wears faster than on wood.
Can I order it under my own brand?
Yes — GUSHI builds OEM programmes: private label, packaging, and bond tuned to your market.








